atroutcatcher
New Member
Greetings everyone!
I've recently performed my first tile installation in one of my bathrooms and it's time to reinstall the toilet.
I did my best to read about this, but have apparently missed something...amateurs!
With that, the toilet flange (I think) was screwed into the floor and was glued to the existing plumbing. I attempted removal of the flange so that I could install new subflooring underneath it, but no luck (as mentioned, it was glued).
Now I have the tile installed and left the flange in it's original position (screwed to the existing subfloor). Now it's approximately 7/8 inches (after the tile, hardibacker and such were installed).
I attempted looking through the forums for similar dilemmas, but cannot find anything to match my challenge.
So, any advice on what to do now? Is there an 'extension' i can install on the existing flange to bring it up to the tile level?
Thanks everyone!
I've recently performed my first tile installation in one of my bathrooms and it's time to reinstall the toilet.
I did my best to read about this, but have apparently missed something...amateurs!
With that, the toilet flange (I think) was screwed into the floor and was glued to the existing plumbing. I attempted removal of the flange so that I could install new subflooring underneath it, but no luck (as mentioned, it was glued).
Now I have the tile installed and left the flange in it's original position (screwed to the existing subfloor). Now it's approximately 7/8 inches (after the tile, hardibacker and such were installed).
I attempted looking through the forums for similar dilemmas, but cannot find anything to match my challenge.
So, any advice on what to do now? Is there an 'extension' i can install on the existing flange to bring it up to the tile level?
Thanks everyone!