Posted this in the Well Water forum and was told I might get a better response here.
We just got our test results back on our well and I have tried pulling a few websites to interpret the results but have not had any luck. Could someone knowledgeable in this area please help with the numbers?
Bacteria was done on a separate test and came back good at 0/100. The other test is listed below.
Well Water
EPA 200.7
Arsenic - ND mg/L 0.0100
Calcium - 2.14 mg/L 5.00
Copper - 0.00149 mg/L 0.0250
Hardness - 9.68 mg/L 0.500
Lead - 0.00544 mg/L 0.0100
Magnesium - 1.05 mg/L 5.00
pH 6.59
I have also noticed an orange looking film at the bottom of the toilets which I am guessing is iron? There is no noticeable smell to the water at all.
We just got our test results back on our well and I have tried pulling a few websites to interpret the results but have not had any luck. Could someone knowledgeable in this area please help with the numbers?
Bacteria was done on a separate test and came back good at 0/100. The other test is listed below.
Well Water
EPA 200.7
Arsenic - ND mg/L 0.0100
Calcium - 2.14 mg/L 5.00
Copper - 0.00149 mg/L 0.0250
Hardness - 9.68 mg/L 0.500
Lead - 0.00544 mg/L 0.0100
Magnesium - 1.05 mg/L 5.00
pH 6.59
I have also noticed an orange looking film at the bottom of the toilets which I am guessing is iron? There is no noticeable smell to the water at all.