I've had this confirmed with the plumber - it's 11" rough in from the wall. Our space is very limited. Current toilet is 26.5 inches deep. I can go about another half inch outwards without it confining us too much. I'd also like the higher toilet seat. Is there a toilet out there for me?
My plumber and contractor are NO help to me at all in deciding on a toilet. I think that they just want to re-install what is there (very old AS toilet that uses way too much water) so they aren't having to purchase and then take back toilets that won't work. I'm fine with letting them re-install and then get someone ele to come out later - we already did this in the other bath. In that bathroom, it is a 12 inch rough in exactly - so I knew I was even more limited there as far as depth went.
But, am I correct in assuming that if the schematics show 1" clearance from the wall, I can use a 12" toilet, and just push the toilet all the way to the wall, and it should meet that 11" rough in? Both of my toilets are pushed in all the way. Both are American Standard.
Thanks for any help you can give us!
My plumber and contractor are NO help to me at all in deciding on a toilet. I think that they just want to re-install what is there (very old AS toilet that uses way too much water) so they aren't having to purchase and then take back toilets that won't work. I'm fine with letting them re-install and then get someone ele to come out later - we already did this in the other bath. In that bathroom, it is a 12 inch rough in exactly - so I knew I was even more limited there as far as depth went.
But, am I correct in assuming that if the schematics show 1" clearance from the wall, I can use a 12" toilet, and just push the toilet all the way to the wall, and it should meet that 11" rough in? Both of my toilets are pushed in all the way. Both are American Standard.
Thanks for any help you can give us!