Nami
New Member
Hi,
I recently set up my water softener with these settings:
Fleck 5800SXT Settings:
DF = Gal
VT = 5800
RF = UFbd
CT = Fd
C = 48.1
H = 23
RS = rc
RC = 300
DO = 28
RT = 3:00
BD = 145
BW = 10
RR = 5
BF = 43
FM = t0.7
RE = OFF
VR = OFF
Currently, the flashing display shows that there are only 50 gallons remaining. Yesterday, it was around 200 gallons. My question is why did it not regenerate last night at 3:00 AM since it is below the RC of 300 gallons?
I recently set up my water softener with these settings:
Fleck 5800SXT Settings:
DF = Gal
VT = 5800
RF = UFbd
CT = Fd
C = 48.1
H = 23
RS = rc
RC = 300
DO = 28
RT = 3:00
BD = 145
BW = 10
RR = 5
BF = 43
FM = t0.7
RE = OFF
VR = OFF
Currently, the flashing display shows that there are only 50 gallons remaining. Yesterday, it was around 200 gallons. My question is why did it not regenerate last night at 3:00 AM since it is below the RC of 300 gallons?