xd2005
Member
- Messages
- 36
- Reaction score
- 0
- Points
- 6
I have a Price Pfister faucet - 26 Series Marielle Collection. Against my better judgment today I took the hose off the diverter T that comes from the control valve.
Now, after putting it back on, the thing leaks and I can't for the life of me get it to stop (it did not leak prior to this). It seems simple, I know, you just push the thing on, but doesn't seem to work that easily. I've taken a look at it and the O-ring seems to be fine (I took it out and looked at it. Did not notice any nicks or other problems) and the grey plastic piece appears to be intact (no breaks or anything). I'm just at my wits end on how to get the thing to stop leaking.
I plan to get a new o-rink tomorrow and maybe some silicone grease and see if that works.
Any other suggestions?
Thanks!
For reference, the leaking one is horizontal. The non-leaking one towards the bottom of the picture is vertical, coming out of the bottom of the T.
Now, after putting it back on, the thing leaks and I can't for the life of me get it to stop (it did not leak prior to this). It seems simple, I know, you just push the thing on, but doesn't seem to work that easily. I've taken a look at it and the O-ring seems to be fine (I took it out and looked at it. Did not notice any nicks or other problems) and the grey plastic piece appears to be intact (no breaks or anything). I'm just at my wits end on how to get the thing to stop leaking.
I plan to get a new o-rink tomorrow and maybe some silicone grease and see if that works.
Any other suggestions?
Thanks!
For reference, the leaking one is horizontal. The non-leaking one towards the bottom of the picture is vertical, coming out of the bottom of the T.
Last edited: