Master Plumber Mark
Sensitivity trainer and plumber of mens souls
yes you can
you really cannot over-expand the wirsbo,
but you can make it reall hard for the fitting
to grab together and make a good joint..
by expanding over and over......
I have come to the conclusion with the stuff that it is
wise just to keep a very hot hair dryer on hand....
you put the joint tgether and then hit it with a hot hair dryer
for about 30 seconds or so and you =can actually watch the plastic fitting contract down
this is the absolute best way to be %100 sure that the
fitting will never leak...especially with the joints that you
have expanded a few times more
you really cannot over-expand the wirsbo,
but you can make it reall hard for the fitting
to grab together and make a good joint..
by expanding over and over......
I have come to the conclusion with the stuff that it is
wise just to keep a very hot hair dryer on hand....
you put the joint tgether and then hit it with a hot hair dryer
for about 30 seconds or so and you =can actually watch the plastic fitting contract down
this is the absolute best way to be %100 sure that the
fitting will never leak...especially with the joints that you
have expanded a few times more