Copperdesigno
New Member
- Messages
- 2
- Reaction score
- 0
- Points
- 0
I have a diverter that is leaking when its in the "shower" position.
I took the diverter apart and I got to the stem, however, the stem is nothing I have seen before, I don't see any hex to get the stem wrench on.
There is two flat surfaces on the brass, i tried to take pliers to it, but it didn't budge.
There is a nut on there as well, I thought maybe if that comes off, which it did, I could slide the guts of the stem out and replace the gaskets.
any ideas guys?
Thanks
The house is 50-60 years old, if that helps
I took the diverter apart and I got to the stem, however, the stem is nothing I have seen before, I don't see any hex to get the stem wrench on.
There is two flat surfaces on the brass, i tried to take pliers to it, but it didn't budge.
There is a nut on there as well, I thought maybe if that comes off, which it did, I could slide the guts of the stem out and replace the gaskets.
any ideas guys?
Thanks
The house is 50-60 years old, if that helps