Delta 800 Deltique Plumbing fixtures

Users who are viewing this thread

Marlinman

In the Trades
Messages
915
Reaction score
421
Points
63
Location
Jacksonville Florida
Delta does not make a plug for this and it is not a standard thread. To plug the hole you will need a 1/4" pipe tap and a brass plug to match. Although this has no real pressure use a thread sealant since it will be in the wall.
 
Last edited:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks