Scup
New Member
Thank you, for answering the question that Franklin never did answer! The only reason I wrote to them was to find out if their (fairly expensive) pump protection box would work with a SCV system. I suspected, like you stated, that the operating current would go all over over the place and likely fool the "pumptec" box; starting to think that it may have been likely that Franklin knew it too, which is why they did not respond to my question.
I really think I like the idea of having the power cut off to the pump and not coming back on automatically, if there should ever be only 20 psi. If the pressure should ever drop that low, something is very wrong somewhere, and I want to be in the loop to figure out what went wrong before placing the system back in operation for my family.
Sorry your email got bounced, but it was not done at my end. I suspect you might have a missed a character in the address of something, but no matter, as I have read your reply above, and will visit the link suggested.
I really think I like the idea of having the power cut off to the pump and not coming back on automatically, if there should ever be only 20 psi. If the pressure should ever drop that low, something is very wrong somewhere, and I want to be in the loop to figure out what went wrong before placing the system back in operation for my family.
Sorry your email got bounced, but it was not done at my end. I suspect you might have a missed a character in the address of something, but no matter, as I have read your reply above, and will visit the link suggested.