viennamicro
New Member
I've been laboring on a clay pipe problem under my basement floor for a week now. I've tried several products but have yet to get the joint to seal at the bell.
After trying silicon calk, I'm back to plumber's epoxy putty and have the flow down to a drop every 6 seconds or so with some ocassional sewer gas problems.
Can I just seal the joint in 6-8 inches of concrete and be done with it? There is more than enough earth between the bottom of the concrete floor and the pipe to make this pour.
After trying silicon calk, I'm back to plumber's epoxy putty and have the flow down to a drop every 6 seconds or so with some ocassional sewer gas problems.
Can I just seal the joint in 6-8 inches of concrete and be done with it? There is more than enough earth between the bottom of the concrete floor and the pipe to make this pour.