dtaylo1066
New Member
The 3" PVC closet bends at Home Depot and Lowes are not long enough to reach up from the 3" PVC horizonal waste line to the finished floor level. They come up short short and are 1.75 inches below finished floor level.
My home is only 15 years old, so is the line too low or do I just need:
1) a different manufacturers closet bend that extends higher;
2) a flange with and extra long downward section.
HD and Lowes don't have either of these, so where can I source them?
3) a third option could be to put two 45 degree closet bends back-to-back, but that might extend too high.
My home is only 15 years old, so is the line too low or do I just need:
1) a different manufacturers closet bend that extends higher;
2) a flange with and extra long downward section.
HD and Lowes don't have either of these, so where can I source them?
3) a third option could be to put two 45 degree closet bends back-to-back, but that might extend too high.