abrahuang
New Member
- Messages
- 19
- Reaction score
- 0
- Points
- 0
I am replacing cast ion pipes with schedule 40. To route the toilet branch from vertical to horizontal, I used a Y. Can I replace the Y with 45 elbow, or a 90 long sweep, saving the cleanout?
http://picasaweb.google.com/abrahuang/HouseBasementPlumbing/photo#5116227117896496402
Another cleanout question is when I was replacing the vent part, because of the change of direction from the original cast ion pipe, the horizontal end was blocked by the chimney. Since the neoprene 90 long sweep elbow can be disassambled easily, we can always access the section of pipe from this point. Is a cleanout still required in such case?
http://picasaweb.google.com/abrahuang/HouseBasementPlumbing/photo#5116231047791572258
http://picasaweb.google.com/abrahuang/HouseBasementPlumbing/photo#5116227117896496402
Another cleanout question is when I was replacing the vent part, because of the change of direction from the original cast ion pipe, the horizontal end was blocked by the chimney. Since the neoprene 90 long sweep elbow can be disassambled easily, we can always access the section of pipe from this point. Is a cleanout still required in such case?
http://picasaweb.google.com/abrahuang/HouseBasementPlumbing/photo#5116231047791572258
Last edited: