This bath sink and drain were here when I bought the house 40 years ago. It has been jery rigged over the years because of rust. I found a replacement sink, same style, hanging, and there is no cabinet under the sink.
The painted 11/2" galvanized drain pipe, draining vertically through the floor, will be replaced with PVC. The horizontal, painted, galvanized 11/2" pipe that goes into the wall is a dedicated vent that goes up to the roof. I am pretty sure if I unscrew the vent arm from the drain pipe it will fall apart.
The painted 11/2" galvanized drain pipe, draining vertically through the floor, will be replaced with PVC. The horizontal, painted, galvanized 11/2" pipe that goes into the wall is a dedicated vent that goes up to the roof. I am pretty sure if I unscrew the vent arm from the drain pipe it will fall apart.
- Without opening up the wall, how to plumb this correctly? Cut the galvanized vent pipe and then how to attach to that?