eessydo
New Member
- Messages
- 5
- Reaction score
- 0
- Points
- 0
I have an annoying little drip where my tank connects to my bowl on a toto Pacifica. I have done everything from Tightening the bolt, to loosening the brass bolt, to repositioning the tank on the bolts.
WHile repositioning worked for a little bit of time, if someone leans back on the tank during a session the leak reappears.....
Should I apply a bead of Silicon prior to tightening down the bolt/rubber washer or use some Plumbers Putty to seal the drip? Or any other good ideas to stop this would be appreciated. My wife is pregnant and not happy about having to walk down the hall to the half bath every time nature calls, and I have not heard the end of it...
TOTO Pacifica CST808
WHile repositioning worked for a little bit of time, if someone leans back on the tank during a session the leak reappears.....
Should I apply a bead of Silicon prior to tightening down the bolt/rubber washer or use some Plumbers Putty to seal the drip? Or any other good ideas to stop this would be appreciated. My wife is pregnant and not happy about having to walk down the hall to the half bath every time nature calls, and I have not heard the end of it...
TOTO Pacifica CST808
Last edited by a moderator: