American Standard "Clean White Elongated"....

[French_guy]

Hello

How do I replace the fill valve on this model of toilet, without removing the tank?
The nut is lodged into a recessed area, so I don't see how I can remove it easily
Is a special wrench needed? that seems weird.....!

 

[Reach4]

I don't know that toilet. Maybe take a photo with your cellphone of the underside.

Would a deep socket do it?

 

[Sponsor]

 

[Terry]

You will need to remove the tank for replace the fill valve and supply line for that tank and bowl.

 

[Reach4]

That sketch looks a bit like a Fluidmaster, but I guess that is unlikely.

But if it were, and OP could replace a seal from the top, that would be nice. Or maybe swap out the whole thing that adjusts higher or lower. Probably too much to hope for.

 

[French_guy]

You will need to remove the tank for replace the fill valve and supply line for that tank and bowl.

I was able to replace the supply line without taking the tank out. But I can't access the nut
As suggested above, would a deep socket work? Would you know the size actually?
Thanks

 

[French_guy]

Found it..........it's 36mm