jon chilpigian
New Member
I have a well that was drilled 7 months ago down to 600'. We have ran several 24 hour test straight off the well and have filled our 2500 gallon tank numerous times to try to clear the water in the 7 months. I have cleaned out of the bottom of my tank almost 12" of sand and silt 6 times. Just did it yesterday and as soon as I turned the well on to refill the tank it started filling with brown water and I could see the sand forming on the bottom. I only filled it half way and the water was so murky I couldn't see the pipe more than 3 inches going down. I have had the well company that drilled come out and they have told me it is what it is and there is nothing wrong. But they have their money so I wouldn't expect anything else from them. Could this be the way is and should I just filter the well to the tank or should I get a second opinion. This my first time writing in a forum so take it easy on me please.... Ha Ha
Thank you in advance
Jon
Oh and I forgot to add the water line is at about 300' and the pump is set at 450'.
Thank you in advance
Jon
Oh and I forgot to add the water line is at about 300' and the pump is set at 450'.