Search results

thank you so much for the reply this is going to save me money I didnt even have right now, God bless!

I have 100 ft of submersible 12a twisted wire hooked to it above ground right now for a temp fix, this wire is in good shape so I was hoping I could reuse it. It is about 70 feet from my breaker box to the pump

dont really remember for sure but the control box says HP 1 max amp 8

bad leg in the wiring to the pump, I had about 100 feet of 12 submersible pump strand in the shed so I had to run to it above ground until I can afford to buy some 10Q. I did notice the capacitor was leaking and I had a spare box so I exchanged the face out with the spare for now. Could I just...

bad leg in the wiring to the pump, I had about 100 feet of 12 submersible pump strand in the shed so I had to run to it above ground until I can afford to buy some 10Q. I did notice the capacitor was leaking and I had a spare box so I exchanged the face out with the spare for now. Could I just...

You guys helped me bunch with my last problem about 6 months ago but i have another so I figured I would ask. During the night last night my pump went out, I am about to be off work and I am going to go home and check it. My wife says she flipped the breaker off then back on but when she goes...

Great info, thanks!

It's cool, I'll re adjust it tomorrow to 20/40. Again, thank you so much for the help!

You guys are awesome I really appreciate it,ni have it set coming on at 19psi and shutting off at 35psi, still comes on pretty frequent. My daughter was in the shower and it has came on 3 times so far in 10 mins

Will the big spring only change cut off pressure?

It only drops barely a couple pounds and holds there

Replaced the check valve today, also had to buy some new piping and conduit. The rattle noise is gone but it still only fills to 32 psi, the pressure gauge does also still fall although very slowly now.

Also forgot to mention there is a rattling noise when the pump starts thats lasts throughout the pump cycle.

Is that something I can change out by myself? I mean if I disconnect power and start wrenching am i going to have a water geiser?

Didn't have time last night when I got home and the same this morning before I went into work but i did het a couple pics. I cant upload them from my phone if anyone will let me email them maybe you could upload them for all to see. I did notice this morning as I was taking the pictures when the...

Thanks so much for the help I'll give it a shot when I get home from work. How much air should I add? I assume I have the name of the valve right, it's the one in front of the 20/40 pressure switch.

I didn't think I could fill air through a schrader valve?

Thanks for the reply Craig, how would i go about putting a pre charge of air? Reach, the float is in the side and part of the gauge assembly

I noticed a couple weeks ago my pump was cycling over and over and water pressure goes up and down during the process if you have a valve open. I had to put a new pump in about 8 years ago due to a lightning strike but used the existing tank so hopefully thats not the issue as I am only working...