Attach 3 poly storage tanks to jet attached to shallow well

[tawnee]

I have a 45 depth well with 20 ft of water never been used it's just cased with the white cap on top the well is 9 years old I have a older well that's pretty much dry that's about 10 ft away that has the electric from the house I plan on using the electric from the one well and giving it to the new well so I don't have to do a new electric line I plan on getting a jet pump to attach to the new well I have three Poly storage tanks already each carry about 100 gallons each I'm wanting to have a system where it is the well pump connected to the jet pump to the three poly storage tanks to water compressor tank could any one draw me diagram on how to do this or the steps for beginner. I can't move into the property until its done and it would be extremely costly to have some one come out and do it all. I just need shower do dishes and laundry

 

[Valveman]

A shallow well jet pump won't lift from 45' deep. You will need a deep well jet or a submersible would be better. It doesn't matter how many storage tanks you connect as long as the height of the water in all three is the same.