toilet installation

  1. J

    New toilet in product development

    I'm Jeremy Cressman and I work for VitrA. We're working to design new toilets to meet the needs of contractors here in the US. I'm talking to installers to understand what works, what's important, what you wish manufacturers considered today. Is there any new or underappreciated feature...
  2. Pbsea

    Alleviate Wall Hung Toilet Play/Flex

    Hi, Installed a toto wall hung toilet on to a Geberit Wall Carrier, I've since noticed a small amount of play/flex on the toilet which I'm assuming is from the drywall between the toilet and the carrier getting compressed. Is there a solve for this? Is this something I should be worrying...
  3. DylanStrange96

    Closet Flange & bend installation

    Hi all, I'm trying to install a toilet and have purchased a closet bend that is 4"-3" and a flange that is 3"-4" the flange does not fit snug into the bend and I'm at a loss as to why these parts don't fit together- I followed the specification from my plumbing book. Does anyone know why these...
  4. JRG_52

    Issues replacing an antique toilet

    I'm trying to replace a 1950s era toilet in an older house in Seattle. I just posted a question about keeping or replacing this toilet in the toilet forum, so I'm covering all bases here. The supply line comes up through the tile floor, and will interfere with the footprint of every new toilet...
  5. Terry

    Cutting toilet closet bolts

    There are many ways of cutting closet bolts when installing toilets. Most people use a hack saw blade. If you have a good flange, and have secured the closet bolts to the flange with washer and nut, then you may want to try our method. It breaks off clean and leaves a good thread. That makes it...
  6. Terry

    DXV Fitzgerald D2205CA.101 toilet installation with pictures

    DXV Fitzgerald D2205CA.101 toilet installation with pictures DXV is a branch of American Standard. The Fizgerald looks to be similar to the Cadet 3 Flowise with concealed trapway design. Here are pictures of one being installed. DXV Fitzgerald D2205CA.101 The D23005C.00 bowl It's a...
  7. Stacey Maud

    Toilet plumbing in wall?

    My bathroom's being remodeled, and the plan was to move the toilet to a new location. After opening up the floor we realized the joists run in the wrong direction - and we'd have to extending the existing bulk head below to accommodate the move. Can anyone tell me - if I get a toilet that has...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks