propex

  1. Kamil

    Securing hePEX

    Hello, I would like to know what people use to secure uponor hePEX when used for heating. I am running multiple lines and want to secure them to the basement ceiling. I saw plastic clamps available but they are rated at 150 degrees whereas the water from the boiler peaks at 200f. Would those...
  2. Kobryn

    1/2" valve: use 1/2" or 3/4" aquapex?

    I'm installing a Grohe SmartControl 1/2" valve with two 2.5 GPM shower heads that can potentially run simultaneously. I've gone thru all 1/2" vs 3/4" pex threads on this forum but I'm still not sure which one should I use. It's a second floor bathroom with 3/4" trunk copper line that I'm going...
  3. Ro78727

    PEX-B to PEX-A Adapter

    Does anyone have recommendations on the best way to connect PEX-B (uses copper rings) to Uponor PEX-A (expansion fittings)? The house I’m in has the main line using Pex-B and copper ring fittings. I’m splicing into it to install a soft water loop. I have the tools and some experience to...
  4. frankjrizzo

    PEX crimp fittings with ProPEX tubing and expansion rings

    Hello All, I'm remodeling a bathroom in my Mom's mobile home in Lake Wales, Florida. I've replaced all of the gray polybutylene pipe with ProPEX (PEX-A). Unfortunately I'm short about 4 fittings and I want to begin sheetrocking this weekend. Ordering online will not get what I need here till...
  5. Cris2017

    ProPEX shower valve instalation

    I have a cpl quick questions: First what are the different options to install a shower valve while using ProPEX Uponor. I can go to the supply lines and up to the shower head with 1/2 PEX line, but I cannot go to the tub spout with 1/2, so if I don't want to solder copper, is there any other...
Top