main water line

  1. mrbb008

    How to connect 1" PEX A to 3/4" water meter line?

    My water meter is 3/4" but I can't figure out the easiest way to connect 1" PEX A to it. Right now I have 1" galvanized pipe. I looked everywhere and a water meter coupling with 3/4" threaded to 1" PEX A does not exist. Propex seems to sell water meter couplings to PEX but only for 1" or 1 1/4"...
  2. Drkhrse

    How to Clean Up This Supply Piping Mess

    Hello, I’ve gotten some good info from the knowledgeable folks on this forum before, and this is my first post: The main distribution pipe coming into our Chicago two-flat is 3/4” galvanized from a city-installed 5/8” meter. It runs ~30ft from the front of the basement to the mechanical room...
  3. Alden

    Pipe leak at water shut off or ground water?

    We're in the middle of a basement remodel and now there is water dripping off the wall around the water shut off valve. The wall is damp to the left and right of the valve, not just beneath at the 90. We did replace the old valve and may have damaged the old pipe in the foundation in the...
  4. Briggs2513

    Leaking underground 2" PVC water line

    All, Though I have used this forum in the past this is the first time I have posted anything, all the other forums I have searched for information have been spot on but I just can’t seem to find anything specific on this issue. I recently installed 634’ of 2” schedule 40 pvc bell end pipe...
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks