clack ws1

  1. K

    Clack WS1 slow leak into brine tank

    My Clack WS1 is slowly leaking into the brine tank while in the normal (softening) state. In my attempts to fix this, I have replaced the stack assembly, pistons (amber and black) and (red) injector. I have also checked my drain line by blowing into it. Before I realized that it was a slow leak...
  2. Sturnbow

    Settings Advice for Softener system Clack WS1 with iron/hardness

    Hi everyone - first timer for this forum and first time owning a house with a water softening system. Just bought a house in Florida with the following from a well water test: Hardness - 9 grains per gallon Iron - 2.0 mg/L Looks like we have a system with a Clack WS1/1.25 controller...
  3. HLearning

    Fleck 5600 Mechanical vs Clack WS1

    I'm thinking about getting the Fleck 5600 or the Clack Ws1 Because I live in a starter house that i may move out of in a few years, I don't necessary want to throw away money at a temporary place.. Online, it says fleck 5600 is 8% but i'm not sure how retailers are claiming it's 10% cross-link...
  4. abestophat

    Trying to get Twin Clack WS1 10x54 up and running

    I will apologize for the long post but think a little history may be worthwhile on how I got to this point. I moved into a home last year that has a (2) Clack WS1 heads with 10x54 tanks, brine tank, 300 gallon water tank with Matala HK-25LP aerator for diffuser inside tank. The home was sold...
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks