clack ws-1

Hey everyone. Been reading the forums and learning a lot in trying to fix my water softener, but still no success. Hoping someone can help me get this thing working again. Here is what I have, what I have done, and what I am experiencing. Softener * Clack WS1 (I'm pretty sure) valve * 54" tank...

Hey yall, I right now have a softener and iron breaker, both clack ws1 from charger water treatment products. They are also both 1.5 cubic ft. I have a relatively large house with a family a 5 and I want to upgrade my iron filter from a 1.5 cubic ft 10x54, to a 2.5 cubic ft 13x54. The injector...

Hi again, I have a love hate relationship with my Clack WS-1, mostly hate. I can only keep it in service for a few weeks. I've replaced the seal pack twice, pistons, injectors, the works. But no matter the TLC I give it, it always seems to throw something new my way. This time, it is no...

Hello everyone, I am trying to temporarily disconnect our water softener system so we can have our garage epoxy flooring done. It is a clack system that was installed by a local water filtration company. From what I can see is the flow to do this properly: 1. Shut off main water, run faucet...

I'm looking for advice on replacing a Culligan Medalist Plus Model 30 water softener installed in the 2006 timeframe. It is not completing the regeneration cycle due to E1 and E2 errors. Not sure if it's a sticking filter pack or a weak motor. Sometimes I can get it to complete the cycle if I...