wall mount

  1. J

    Loose wall mount delta faucet handle causes leak at faucet.

    I have a Delta Model #: T3567LF-WL wall mount faucet with a loose cold water handle that causes the faucet to drip constantly. I've replaced the stem because it appeared stripped. Now the new stem is doing the same thing after 1yr of use, but doesn't appear stripped and is not the issue. If I...
  2. P

    Toilet wall carrier compatibility

    I am wanting to use wall mounted toilets in my bathroom remodels but the cost for the wall mount toilet carriers is excessive. I like the Toto wall mount commercial toilets with a top bung and would like to use them with a high tank set up or with the tank mounted to the bowl. But when i...
  3. BobMane

    Utility Sink Faucet, Central Brass 0048-UA Series

    I bought this: https://www.homedepot.com/p/Central-Brass-Wall-Mount-2-Handle-Standard-Kitchen-Faucet-in-Chrome-0048-UA/100411281 and tried to install it in my stainless Utility Sink one side kept leaking even with dope and tape then I think I might have stripped by over tightening. (note: it...
  4. oldebondo

    Side by side tub spout and valve

    I am installing a free standing tub (no shower) against a wall and wish to locate the (non-diverter) tub spout toward the foot-end of the tub and the valve control toward the head end. Both the spout and the valve will be on the same wall and about 21" from each other. The spout and valve will...
  5. Dadnoz

    Using gravity flush on a flushometer bowl

    is it possible to use a tank on a bowl specified for flushometer use? the tank would need to have sufficient capacity of course, but are there other considerations? Wanting to revert a 2 piece 4 bolt wall mounted toilet back to an in wall tank as originally installed circa 1960. Considering a...
  6. nick tinari

    1992 american standard wall mount (glenwall ?)

    Folks, I am a homeowner with what I think is an early Glenwall model wall mount elongated bowl. toilet. I want to reuse, but my plumber needs mounting specs as the new wall will be thinner than the removed wet bed tile wall. I did not think to measure the wall thickness when I removed the...
Back
Top