Pumptec Plus contactor question

xtorq12

xtorq12

New Member
Messages
13
Reaction score
0
Points
0
I purchased a used unit and want to make sure it's wired correctly (from the control unit circuit board to the contactor ).

Red wire is connected to front of contactor
Black wire is connected to the back of contactor and to L1 on contactor
White wire is connected to L2 on contactor

Is this correct? I'll check back in a.m.
 
Contactor diagram
 

Attachments

  • contactor.gif
    contactor.gif
    16.2 KB · Views: 805
What circuit board? Are you referring to a control box? If so, the red wire does not belong where you have it shown. As a matter of fact the control box should be after the contactor not before it.

bob...
 
Sorry, I should have been more clear. The red, white and black 18 AWG wires in the pic are what I am asking about. They come from the circuit board inside of the Pumptec Plus box and connect to the contactor inside of the Pumptec Plus box.
 

Attachments

  • contactor_1120.jpg
    contactor_1120.jpg
    41.2 KB · Views: 776
Last edited:
The photo does not tell me where the wires come from, so I uploaded this pic for you to study.

bob...
 

Attachments

  • Pumptec+.jpg
    Pumptec+.jpg
    84.9 KB · Views: 1,850
Thanks Bob, I have that diagram in the pic you posted. All I need to do is verify that the red, white, black wires in my pic are connected correctly. I searched the Franklin Electric web site but I was unable to find what I need. I'll wait a couple of days for an answer here, if none I'll try contacting Franklin Electric.
Thanks for everyones help.
 
speedbump said:
I don't think anyone can tell you if they are correct without seeing more in the picture.

bob...
Click to expand...

Well, I was hoping someone can look inside their Pumptec Plus (or upload a picture) and tell me if it's wired correctly. I would have to remove and disassemble the circuit board plastic cover to be able trace the wires. I can't do that at this point because I can still return it for a refund.
 
You must log in or register to reply here.

Similar threads

CommanderDave
Timer Installation
2
Replies
26
Views
6K
Valveman
Valveman
CommanderDave
Contactor Timer Wiring
Replies
3
Views
3K
Reach4
Reach4
C
Incorrect Floats in Septic Lift Tank?
Replies
3
Views
2K
qualityseptictank
Q
Soulbarn
How to disable wired remote on Fujitsu halcyon?
Replies
4
Views
1K
Fitter30
Fitter30
AcidWater
replacing switch in 4 gang box - two black wires, which is the neutral?
Replies
9
Views
4K
AcidWater
AcidWater
Back
Top