GotCoffee
New Member
We have new well, dug June this year. We have had low water pressure the whole time. I adjusted the pressure switch a little but don't know what the safe limit is. Can I adjust the setting to higher pressure without any ill affects? Our house has 3 kids, two are teenagers, 2 full baths, dishwasher, clothes washer... Water pressure is not affected by toilet flushing in master bathroom but has some affect at second bathroom which is at other end of house. Water comes in near master bedroom
It's a new house with the well about 30' away.
Top of well is 2.5" pvc (outside diameter) to the pump. From the pump to tank and house is 1" pvc.
Our system:
1/2 hp myers hr50d (Myers pentair Water)
Tank is WellMate WM6
Tag on well is 10gpm
45ft with screen at 40 ft.
I live near Fayetteville, NC and am using a 60 bulb in metal reflector aimed at pump. The pump house cover is one of those basic plasic white ones with foam insulation on inside. Should I go with heat tapes or will this be enough?
Thanks,
Ray
It's a new house with the well about 30' away.
Top of well is 2.5" pvc (outside diameter) to the pump. From the pump to tank and house is 1" pvc.
Our system:
1/2 hp myers hr50d (Myers pentair Water)
Tank is WellMate WM6
Tag on well is 10gpm
45ft with screen at 40 ft.
I live near Fayetteville, NC and am using a 60 bulb in metal reflector aimed at pump. The pump house cover is one of those basic plasic white ones with foam insulation on inside. Should I go with heat tapes or will this be enough?
Thanks,
Ray