GaryD
New Member
- Messages
- 16
- Reaction score
- 0
- Points
- 0
I am installing a basement bathroom. The builder had installed a sewage basin for me when he built the house. The shower drain, toilet and sink feed into 1 pipe that feeds into the basin. The pipe extend about 2/3 of the way into the basin.
Should I cut the pipe as close to the side of the basin as possible or how far should it extend into the basin?
Also, I will be running a 2" vent and 2" waste pipe out of the basin. I can not find a place to but the seals I need for the 2" pipes and the electrical seal. Any suggestions?
Thanks, Gary
Should I cut the pipe as close to the side of the basin as possible or how far should it extend into the basin?
Also, I will be running a 2" vent and 2" waste pipe out of the basin. I can not find a place to but the seals I need for the 2" pipes and the electrical seal. Any suggestions?
Thanks, Gary