Firstly hello and thanks for any potential help I am working on planning a basement remodel and would like to reroute some DWV if possible to maximize ceiling space. I am in Wisconsin.
In the attached image, the T is a toilet and the V is the main vent; these are 4" PVC. Currently these drop below my floor joist (brown line) and continue on down the green route. I am trying to route these south and avoid dropping all the way below the joist until closer to the cement wall, possibly either by somehow going thru the joist or venting up thru the wall. The floor joists are 2x10 so I think the maximum size that can go thru (horizontally) is 2". One more fixture in play in this setup is a bathroom sink that drains horizontally into V.
Let me know if something is unclear in the picture or if more details would help and thanks again!
In the attached image, the T is a toilet and the V is the main vent; these are 4" PVC. Currently these drop below my floor joist (brown line) and continue on down the green route. I am trying to route these south and avoid dropping all the way below the joist until closer to the cement wall, possibly either by somehow going thru the joist or venting up thru the wall. The floor joists are 2x10 so I think the maximum size that can go thru (horizontally) is 2". One more fixture in play in this setup is a bathroom sink that drains horizontally into V.
Let me know if something is unclear in the picture or if more details would help and thanks again!