Philtrap
Member
Folks,
I finished my TT-110 boiler installation with a buffer tank today. Buffer tank installed due to oversized boiler (my fault). See photo below. It's a tight spot so some short cuts were required. The DHW will come once the gas wot water heater goes, or next year, which ever comes first.
Comments are welcome. Any fixes you think may be needed before winter would be nice too. The flue above the unit is temporary until the DHW is installed and then chimney will be abandoned.
Only thing left to do is set the controls, but it works OK with the factor presets. I'm probably going to have to raise the output temperature for the baseboards.
Thanks,
I finished my TT-110 boiler installation with a buffer tank today. Buffer tank installed due to oversized boiler (my fault). See photo below. It's a tight spot so some short cuts were required. The DHW will come once the gas wot water heater goes, or next year, which ever comes first.
Comments are welcome. Any fixes you think may be needed before winter would be nice too. The flue above the unit is temporary until the DHW is installed and then chimney will be abandoned.
Only thing left to do is set the controls, but it works OK with the factor presets. I'm probably going to have to raise the output temperature for the baseboards.
Thanks,