so my well is down 315' I have a 2500 gal holding tank and everything is set up pretty normal. i also have a pressure tank and a secondary pump, and a pump saver wired in. the well pump is 1 1/2 hp.it only pumps water into the holding tank for about 5 seconds and stops. if I let it sit for about a half an hour with the pump and pump saver turned off, it pumps for about a minute and shuts off. shouldnt it just keep pumping until my holding tank says its full and shut off. i don't know if the pump saver is detecting too much load and telling it to shut off, or im running out of water, or the pump is bad. i don't care if it pumps only a couple gallons a minute just as long as it keeps pumping. a couple seconds at a time just doesn't seem right. any input would be great.