BobL43
Hmmm sorry for confusion,
Ill try and be a little clearer:
The pumptec you saw with the burn spot is what is on my well . I cleaned it yesterday.
The Franklin control box 1-1.5 HP is also what is on the well with the pumtec burn spot.
( I will mention the other franklin control box at the end incase swapping is suggested)
As usual,this morning I attempted a pump start and it tripped off in about 2 or 3 sec.
For the last 2 or 3 days since I have been posting here,the control box has been tripping ,as above ,any time a demand was placed for the pump to turn on.
There have only been 2 exceptions ,& only once each day and at random times of day:
Thats when the pump pumped water only one time each day(only with a manual reset). Any other attemps throughout each day it simply tripped off.
This morning I attempted another reset to see if it would pump and it just popped off once again.
I will attempt these manual resets throughout the day in hopes one of them will work .
My water is now below the jet foot valve? and it will not turn on to bring the tank water into the pressurized tank for home use. So Im out of water for this week end and will try and get someone out here Monday at soonest. Unless of course any of you can help me solve this problem and assuming I can do the fix.
Thats also why Ive included the pictures of the two franklin control boxes. Hopefully, someone may be able to determine if i should swap boxes or no.
Note. The current box on my well that keeps tripping is the 1.5 HP box pictured
The pictured spare Franklin control box,2hp, I have just in case i can either scavange parts or do a complete box exchange if needed.
If my pics of the 1.5HP and the 2 HP boxes arent good enough,I can always retake a better angled pic so someone can determine if its a match.
i looked at the wiring ,compared both boxes and they looks matchable to me,but then what do I really know about electrical....as you can tell,not much.
All the insertion and origin points match up. The only variation is joining in of the 2nd trip sensor ,but its wires still end up at the proper insertion point .
Hope that helps
( my lifetime quote: I usually have enough to get in the door,but not enough to stay"