Bob from Plains
New Member
- Messages
- 17
- Reaction score
- 0
- Points
- 0
I bought my house 2 yrs ago, at that time whenever the well turns on we get a vibration in the pipes and noise. The house is 20 yrs old, the original owner ran 1 1/4" black poly to the house and then inside went to 1 1/2'' galvinized to the pressure tank which is on the other side of the house. From the tank the supply line is 3/4" copper. The noise hasn't gotten any worse but is always there when the pump runs. The 1 1/2" pipe runs above the sheetrock ceiling so I am not sure how they suspended it. Any advise on this problem would be greatly appreciated.
Bob
Bob