All,
I've been having an issue of either freezing cold water or scalding hot water in my shower for about a month, with no in-between. I've checked the water heater, etc, and that's fine, along w/ the other showers in the house. I've decided to at least try and replace the mixer valve since it's 10 years old. Once I removed everything, I can NOT pull the valve out. If you look where I've circled on the picture, it appears as if whoever installed it, put screws in the top/bottom slots from behind the wall!!! (meaning there's now way to get to them).
Does anyone have any thoughts on how to get this valve removed?
I've been having an issue of either freezing cold water or scalding hot water in my shower for about a month, with no in-between. I've checked the water heater, etc, and that's fine, along w/ the other showers in the house. I've decided to at least try and replace the mixer valve since it's 10 years old. Once I removed everything, I can NOT pull the valve out. If you look where I've circled on the picture, it appears as if whoever installed it, put screws in the top/bottom slots from behind the wall!!! (meaning there's now way to get to them).
Does anyone have any thoughts on how to get this valve removed?
Last edited by a moderator: