Shower valve with male thread

D

dougeefresh

New Member

Messages

3

Reaction score

0

Points

0

Location

Chicago

• Sep 19, 2012

• #1

Hello.
I just bought a shower valve from Price Pfister and it has male threaded ends.
Is it OK to just sweat the copper tubes on directly or should I go through female threaded ends? Any reason not to solder on the tube directly on the male end? Thanks!
Great forum by the way!

 

Terry

The Plumbing Wizard

Staff member

Messages

29,942

Reaction score

3,461

Points

113

Location

Bothell, Washington

Website

terrylove.com

• Sep 19, 2012

• #2

If you can insert the copper there, then that's the second option you have. I would solder the pipe and skip the fittings.

 

Sponsor

Paid Advertisement

• 1 minute ago

• Add bookmark
• ##

 

D

dougeefresh

New Member

Messages

3

Reaction score

0

Points

0

Location

Chicago

• Sep 19, 2012

• #3

It fits well just like any others without the threads so I will solder them on.
That was an awesomely quick response. Thanks, Terry!

 

hj

Master Plumber

Messages

33,608

Reaction score

1,047

Points

113

Location

Cave Creek, Arizona

Website

www.terrylove.com

• Sep 19, 2012

• #4

That is the way a plumber would do it. But, it is INTO the threaded end, NOT ON it.

 

D

dougeefresh

New Member

Messages

3

Reaction score

0

Points

0

Location

Chicago

• Sep 21, 2012

• #5

hj said:

That is the way a plumber would do it. But, it is INTO the threaded end, NOT ON it.

Click to expand...

Hi, hj,

Yes, that's what I did and it worked like a charm.
Thanks!