(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Flexcon Challenger tank moved slightly

  1. #1
    DIY Junior Member Flawell's Avatar
    Join Date
    Jul 2012
    Location
    Northeast Florida
    Posts
    2

    Default Flexcon Challenger tank moved slightly

    I just had a new Flexcon tank installed on my well. Today, the carpenter building a little house around the tank and softener, moved the tank about a quarter of an inch to the right. He did it before I could say anything. Am I going to have a leak or any other problem with it? Should it be moved back? He was trying to keep it from touching one of the wall studs.

    Probably nothing but I just want to be sure there's no issue.

    Thanks.

  2. #2

    Default

    I wouldn't think that would hurt anything. If you were going to have a leak from moving it, I would think it would have started right then.

Similar Threads

  1. Correct placement of Flexcon Flow-Thru FT-18 pressure tank help.
    By Scott Stemen in forum Pumps and Tanks Well Forum & Blog
    Replies: 3
    Last Post: 07-05-2012, 05:46 AM
  2. flexcon tanks
    By madfire in forum Pumps and Tanks Well Forum & Blog
    Replies: 1
    Last Post: 07-14-2009, 01:05 PM
  3. Moved Pres Tank/Nuetralizer/Softener now no cold water anywhere
    By fornarog in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 16
    Last Post: 09-19-2008, 05:30 AM
  4. Where to buy Flexcon
    By nitrors4 in forum Pumps and Tanks Well Forum & Blog
    Replies: 42
    Last Post: 10-05-2007, 05:04 AM
  5. Toto Drake Tank Rocks Slightly
    By l8night in forum Toilet Forum discussions
    Replies: 2
    Last Post: 07-08-2007, 01:51 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •