I'm on my second well. First well would not clear after 1 1/2 months of running on a timer off and on. It would finally clear pretty good after running for 15 minutes but who wants to run 150 gallons before you can get a drink. Driller did a new well same sand, different location, looks like same result. It will clear up some after running but very cloudy after it rests. There was no well development, just let it run. What specifically should he do/have done and at what point in the process? He did not hesitate to drill second well after fist one would not clear so I think he would be open to suggestions. I posted a thread about maybe using a Freshpoint filter but did not get much response. Driller is very accessible, returns calls, and I know he wants to make it right. I've got five kids and old well collapsed so I need potable water like pronto. Any help would be very appreciated.