Kitchen sink

eridia · Nov 15, 2011

I just installed a new SS kitchen sink. I cut out the corners square instead of rounded. Where can I get a sink trim ring to cover the holes in the corners?

JohnjH2o1 · Nov 15, 2011

As far as I know you can't. Most cutouts require a 1-1/2" radius on the corners. If you have the room under the cabinet you can always go to a larger sink.

John

Sponsor · 2022-01-29T12:20:58-0800

eridia · Nov 15, 2011

This is a 33 x 22 sink and I don't have much more room. That looked like the largest Home Depot had.

Gary Swart · Nov 15, 2011

Every sink I have ever installed had a template included. Sorry to say this, but I think you screwed up.

hj · Nov 16, 2011

You need an Elkay sink with square corners, but they are NOT the lowest priced versions.

Jimbo · Nov 16, 2011

Here is an Elkay with square corners, that might work: http://www.elkayusa.com/cps/rde/xchg/elkay/hs.xsl/elkay-res-10378.aspx
It is also $1,000 so you have unfortunately learned an expensive lesson. I have done worse!!!!!!

hj · Nov 17, 2011

Elkay makes a Lustertone LR-3322 for a lot less than that. Most of their sinks, other than the Pacemaker/Starlite lines have square corners.

Kitchen sink

Users who are viewing this thread

eridia

New Member

JohnjH2o1

Plumbing Contractor for 49 years

Sponsor

Paid Advertisement

eridia

New Member

Gary Swart

In the Trades

hj

Master Plumber

Jimbo

Plumber

hj

Master Plumber

Similar threads