dlatzko
New Member
Is it normal to have the submersible pump below the casing? Any other comments? Here is what the invoice from my two year old well system says:
482 ft drilled at rate of $8.50 / ft
140 of Sch 40 steel casing @ 18.00 / ft
pressure grout as required
drive shoe
1 hp 5 gallon Aermotor Sub Pump
1 hp control box
455 ft 10/4 Sub wire
450 ft of 200 psi pipe
455 ft rope
etc...
482 ft drilled at rate of $8.50 / ft
140 of Sch 40 steel casing @ 18.00 / ft
pressure grout as required
drive shoe
1 hp 5 gallon Aermotor Sub Pump
1 hp control box
455 ft 10/4 Sub wire
450 ft of 200 psi pipe
455 ft rope
etc...