k11
New Member
Hello: Great site with lots of good info!
We moved into a house with a Toro irrigation system. The valves installed are Toro jar top inline valves (53708) (see attached picture). Is there a trick to installing the solenoid. It screws in fine if I take out the solenoid plunger, but with the plunger in, the threads just don't make contact.
We moved into a house with a Toro irrigation system. The valves installed are Toro jar top inline valves (53708) (see attached picture). Is there a trick to installing the solenoid. It screws in fine if I take out the solenoid plunger, but with the plunger in, the threads just don't make contact.