North_Shore
New Member
I have started to notice water coming out from under our baseboard moldings after we use our shower so I am thinking it's a leaking drain. I went to remove it to inspect and putty it but it proves to be more challenging than expected (of course). The drain is made by B&K Industries for what it's worth. There is really nothing to grab on to to turn the upper ring and the lock nut although accessible from the basement, cannot be reached due to it being up tight to the sub-floor with a tight rough opening. It appears that some sealant might also be present under the flange which could be keeping this from being taken apart. Any suggestions as to how I can go about removing this? I considered cutting the riser at the trap and then trying to turn the whole assembly to loosen it. If that doesn't work I am just digging my whole deeper though. Any help appreciated!