rotorhead27
New Member
I have a Takagi TK1S in southern California. Starting last year and now this year, in the warm summer months when the incoming water is warmer also, when turning on the warm water, the heater will come on, I'll hear the flame light, but try to light again anyway, then it will give up - the fan will jump to high speed then shut off (like if I had shut off the water). If I shut off the warm water and on again BEFORE the fan shuts off, it will usually light properly. Otherwise, I have the keep cycling the hot faucet off and on until the beast finally lights properly.
The error code on the circuit board reports something about irregular flame (which is possible, the propane pressure may possibly increase in the warm weather as well) but it seems more to do with incoming water temp.
Any thoughts, suggestions or additional troubleshooting ideas would be most welcome.
Thanks in advance
Dave
The error code on the circuit board reports something about irregular flame (which is possible, the propane pressure may possibly increase in the warm weather as well) but it seems more to do with incoming water temp.
Any thoughts, suggestions or additional troubleshooting ideas would be most welcome.
Thanks in advance
Dave