redwater
New Member
Because I am not a plumbing person (alas) I broke this bolt that holds the handle in place.
I don't think it can work without it.
It's porcelian and brass trim.
I need to get the bolt for the top of the valve stem. Does anyone recognize this? Do you know if the valve stem or part can be obtained? I am not sure the handle will turn the valve on, without this bolt tightened up.
The broken off bolt is located 1/3 the way up the stem, which is at the bottom of this picture (above)
This is where the bolt goes (into the top of the porcelain handle/ housing)
I don't think it can work without it.
It's porcelian and brass trim.
I need to get the bolt for the top of the valve stem. Does anyone recognize this? Do you know if the valve stem or part can be obtained? I am not sure the handle will turn the valve on, without this bolt tightened up.
The broken off bolt is located 1/3 the way up the stem, which is at the bottom of this picture (above)
This is where the bolt goes (into the top of the porcelain handle/ housing)
Last edited by a moderator: