altynsydykov
New Member
Hello - I am having a problem with my water tank, and getting no water in the house. The pressure on the gauge is at 52, which does not change (it is a Baron pre-charged water tank). There is a little crank on the side of the gauge, and when I crank it, the pipes start moving and I get water in the house. As soon as I switch off the crank, the water stops. I was thinking maybe the pipes froze from the cold weather, but can't be, since I do get water once I turn the crank. Maybe it is an old water pump and needs replacement? Also seems hard to believe as I do get water. Same answer for "Maybe there is no water in the well"? The water that does flow seems really dirty (there is a filter between the water tank and some other tank), but when the comes out of the faucet, it is clean. There is also a water softener, but do not think the water softener nor the other tank are affecting the water flow.
I released air from the water tank for a little, and water seemed to flow in for a few minutes, but then stopped.
Any ideas on what could be going on? I appreciate any help.
I released air from the water tank for a little, and water seemed to flow in for a few minutes, but then stopped.
Any ideas on what could be going on? I appreciate any help.