lorrainedv
New Member
I have 2 X10 switches. 1 controls a driveway light and 1 controls 2 exterior lights on my recently purchased house. I would like to go back to just having a regular on - off switch for each. Both switches have 1 blue & 1 black wire. On 1 switch the blue is connected to 1 black wire. The black is connected to 2 black and 1 red wire and there are 3 white wires that are capped together. On the other the blue is connected to 2 black wires. The black is connected to 1 black wire and the 3 white wires are capped together. What on - off switches would I need and how would I wire them ? Thank You