DavidMc
New Member
- Messages
- 8
- Reaction score
- 0
- Points
- 1
We are adding a new bath onto our house and today finished the water supply feeds into the new addition. These tie in to the existing supply lines just before the existing bathroom ( which will be removed later ). Tonight I found that the hot water in the old bathroom is not near as hot as it normally has been. Could the location of the new supply tie in be the culprit or is it a more likely obstructions in the faucet and shower valves? Kitchen is hot as always - but the shower downstream of the new tie in is way off.
We added about 30' of 3/4" supply to the new bath - tied into 3/4" before it reduced to 1/2".
We added about 30' of 3/4" supply to the new bath - tied into 3/4" before it reduced to 1/2".