JEP
New Member
I need to install an ice maker. The plumbing in the house is all pex. I have easy access to a 1/2" pex pipe, but have some restrictions as I cannot get a crimping tool into the tight area available to me. I'm guessing that a saddle valve and pex would be a mistake, right.
I read a few threads here about shark bite fittings and am thinking that might be a solution. I'd need a 1/2" sharkbite tee, and then from there I'm lost as to how to get down to the 1/4" copper tubing. Any help, much appreciated.
I read a few threads here about shark bite fittings and am thinking that might be a solution. I'd need a 1/2" sharkbite tee, and then from there I'm lost as to how to get down to the 1/4" copper tubing. Any help, much appreciated.