(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Moen 3330 Install Help

  1. #1

    Default Moen 3330 Install Help

    Installing a Moen 3330 in my bath. This is a new construction bathroom. I have framed out and I am needing to locate the valve. Moen states to have the plaster ring flush with the finished wall. The reason that I am asking this question because I also installed a one handle tub/shower in another bathroom not following the directions. I had read in another post to Not install the plaster ring flush so that the handle doesn't stick out 3/4 of an inch. Any comments on the correct location. I will have 1/2 sheetrock,kerdi,thinset, and 1/4 tile.

    Thanks,
    JT in NC

  2. #2
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,412

    Default

    Attach the trim temporarily, and see where you like it! Mock it up with all of the components stacked together.

    Last edited by Terry; 03-14-2012 at 09:52 PM.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •