fjordrr
New Member
Well now I'm tackling my other unfinished bathroom. It has the usual 1/2" supply lines roughed in to the shower area. I bought 3/4" valves which will go to 1/2" showerheads.
My question is: do I just convert ONCE from 1/2" to 3/4" supply lines before the 1st valve (thermostatic mixer) continuing to use 3/4" supply for the rest or do I run 1/2" supply between each 3/4" valve?
So just to outline the full scenario, we have:
A. 1/2" rough-in supplies ->
B. 3/4" thermostatic mixer ->
C. 3/4" volume control ->
D. 3/4" diverter ->
E. 1/2" showerheads.
Thanks for any help!!
My question is: do I just convert ONCE from 1/2" to 3/4" supply lines before the 1st valve (thermostatic mixer) continuing to use 3/4" supply for the rest or do I run 1/2" supply between each 3/4" valve?
So just to outline the full scenario, we have:
A. 1/2" rough-in supplies ->
B. 3/4" thermostatic mixer ->
C. 3/4" volume control ->
D. 3/4" diverter ->
E. 1/2" showerheads.
Thanks for any help!!