Fidodie
New Member
This was going to be so easy - slide a 2" vent up through a gap between a door frame (jack stud), and the perpendicular closet wall. drilled up, and found that the 2" pipe would not fit in the gap - just a hair too big - I have other options, but they mess with my plans for an A/C vent, and exhaust vent.......
on this branch is a back-to-back lav/kitchen sink on a 2" drain. 1 w.c, 1 shower - the total length of the run from under the first floor to the main stack is less than 30' -
do i have an option of 2" thin-wall or 1.5" sched 40? any other ideas (yeah, put the pipe through a planer...)
we are 2003 IPC -
thanks as always..
pat
on this branch is a back-to-back lav/kitchen sink on a 2" drain. 1 w.c, 1 shower - the total length of the run from under the first floor to the main stack is less than 30' -
do i have an option of 2" thin-wall or 1.5" sched 40? any other ideas (yeah, put the pipe through a planer...)
we are 2003 IPC -
thanks as always..
pat