How can I increase the temp of my Mix-it valve.

Users who are viewing this thread

Gabe

New Member
Messages
3
Reaction score
0
Points
0
I had a new bathroom built in June. All new construction. I noticed that the hot water in the shower is not as hot as the sink. The contractor installed a new Delta mix-it valve. I turned up the temperature at the water heater as instructed by the plumber but there is no real change. What should I do to get the water temperature to increase. :confused::confused:
 

Winslow

Plumber
Messages
445
Reaction score
0
Points
0
Location
Hawaii
I had a new bathroom built in June. All new construction. I noticed that the hot water in the shower is not as hot as the sink. The contractor installed a new Delta mix-it valve. I turned up the temperature at the water heater as instructed by the plumber but there is no real change. What should I do to get the water temperature to increase. :confused::confused:


Behind the handle there is going to be a temp limit/ scaldguard stop. adjust it to allow the handle to turn further to the hot position
 
Top